The BB-7025 brushes back the braided shield of shielded cable. Two belt brushes run in the head, 750 mm in circumference and 62 mm wide, and the cable is laid in the gap between them so the bristles comb the braid back over the jacket. Brush length is adjustable from 10 to 200 mm, the machine is rated for cable up to 100 sq mm, and output is 100-200 pcs/h. Speed is electronically controlled from 0 to 1800 and the drive is electric, on an AC220-240V, 50-60HZ supply.
Fraying a shield by hand with a pick is slow and it breaks strands: every broken strand is a loose end inside the connector and a potential short after assembly. The belt brushes make the same movement without a cutting edge - the braid is combed back over the jacket rather than cut - and 12.5 kg of torque at the belt wheel keeps the belt from stalling when the braid is tight or when the cable is at the top of the 100 sq mm rating. The 62 mm belt width keeps the full circumference of a large cable in contact with the bristles, so a 200 mm fray is combed in one pass rather than worked back in stages.
The WPM-1020 covers 1-30 mm cable with 300 W per motor and the same 0-1800 control, and the BB-1525 is a 10 kg unit running to 6000 rpm but limited to 25 mm cable and a 60 mm brush length. The BB-7025 sits between them on capacity: it is the one rated for 100 sq mm and for a 200 mm brush length, in a 48 kg frame of 420 x 480 x 320 mm.
Key Features
1. Two belt brushes of 750 mm circumference and 62 mm width, running as a pair with the cable laid in the gap.
2. Brush length adjustable from 10 to 200 mm, set by the position of the cable in the gap.
3. Rated for cable up to 100 sq mm, which covers heavy braid on power and welding cable.
4. Electronic speed control, 0 to 1800, adjustable while the belts are running.
5. 12.5 kg torque at the belt wheel, so the belt holds speed against a tight braid instead of stalling.
6. 48 kg in a 420 x 480 x 320 mm frame on AC220-240V, 50-60HZ, with a clear guard over the brush area.
Technical Specifications
| Parameter | Specification |
|---|
| Model Number | BB-7025 |
|---|
| Machine type | Automatic shielded wire mesh brushing machine |
|---|
| Brushing Wire Length | 10-200mm |
|---|
| Applicable Wire Diameter | 100 sq mm |
|---|
| Productivity | 100-200pcs/h |
|---|
| Breaking Structure | Rotating Belt Wheel (Pulley) |
|---|
| Rotation Mode | Electronic Control (0-1800 adjustable) |
|---|
| Belt Wheel (Pulley) | 2 pieces (circumference 750 x width 62) |
|---|
| Torque | 12.5kg |
|---|
| Power Supply | AC220-240V, 50-60Hz |
|---|
| Driver | Electric |
|---|
| Weight | 48kg |
|---|
| Dimensions | 420*480*320mm |
|---|
Applications
— Rubber-sheathed power cable for pumps and motors: braided shield combed back before the gland and terminal are fitted.
— Welding cable: tinned copper braid frayed back over the jacket before the lug is crimped.
— Battery and inverter cable: heavy braid on cable up to 100 sq mm brushed back for a clamp or lug termination.
— Marine and generator harness: shielded multi-core cable where the braid has to be dressed back and cleaned before the connector shell is closed.
— Instrument cable with foil plus braid: the braid is combed back and the foil removed in the same handling step.