WPM-018HS cuts the wire, strips it, crimps a terminal on one end with a sleeve inserted behind the crimp, and twist-tins the opposite end. The sleeve is fed from the vibratory bowl on the left of the frame, oriented, and delivered to the insertion station ahead of the crimping head.
Sleeve placement is usually a manual step after crimping, or a separate machine operation. Here the bowl feeder, the crimp press and the tinning station are sequenced by one controller, so a lead leaves with the sleeve seated and the far end already tinned.
Cut length runs from 80 to 3000mm and output is 2000-3000 pcs/h measured at a 300mm lead, which suits longer leads than the 150mm rating used on the WPM-078H. Wire range is AWG14 to AWG24, and the crimping stroke is 30mm with 40mm available.
Key Features
1. Cutting, stripping, one-side crimping with sleeve insertion and opposite-end twist tinning in one cycle.
2. Vibratory bowl feeder orients and delivers sleeves to the insertion station.
3. Capacity of 2000-3000 pcs/h at a 300mm cut length; cut length 80-3000mm.
4. Wire range AWG14-AWG24, customizable.
5. 2.0T crimping force, 30mm stroke with 40mm optional, 0.5-0.6 MPa air supply.
6. Touch screen control panel on a swivel arm with start, stop and emergency stop buttons.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-018HS |
|---|
| Power | AC220V / 50-60Hz |
|---|
| Capacity | 2000-3000 pcs/h (L=300mm) |
|---|
| Functions | Cut, strip, one-side crimp with sleeve insertion, opposite-end twist tinning |
|---|
| Wire Range | AWG14 - AWG24 (customizable) |
|---|
| Cutting Length | 80-3000mm (customizable) |
|---|
| Cutting Accuracy | 0.5mm + cutting length x 0.2% |
|---|
| Stripping Length | 0.5-8mm (customizable) |
|---|
| Crimping Force | 2.0T |
|---|
| Crimping Stroke | 30mm (40mm optional) |
|---|
| Air Pressure | 0.5-0.6 MPa |
|---|
Applications
— Appliance internal wiring: one end crimped with a sleeve behind the terminal, the other end tinned for a terminal block.
— Lighting and transformer leads where the crimp joint carries a sleeve.
— Control cabinet wiring where a sleeve is fitted over the crimp for identification or insulation.
— Motor and pump leads: crimped terminal with sleeve one end, tinned end the other.
— Household appliance harnesses that require a tinned free end without a separate tinning operation.