Automatic Twin Wire Crimp Machine | AWG16-28 | 3200mm Cutting JW-CM01
Automatic Twin Wire Crimp Machine | AWG16-28 | 3200mm Cutting JW-CM01 Thumb Automatic Twin Wire Crimp Machine | AWG16-28 | 3200mm Cutting JW-CM01 Thumb
Video Thumbnail

Automatic Twin Wire Crimp Machine | AWG16-28 | 3200mm Cutting JW-CM01

📅 2026-05-18 👁️ 2,817
  • Model No: JW-CM01

  • Specifications

    Automatic Twin Wire Crimp Machine | AWG16-28 | 3200mm Cutting
    Available Wire Size: AWG16-AWG28#
    Cutting Length: 45-3200mm (Longer can be customized)
    Cutting Accuracy: cutting length *0.2%
    Stripping Length: 0.5mm-14mm
    Pressure Capacity: 1.5T
    Detection Device: no wire; no terminal, insufficient pressure
    Voltage: AC220V/50Hz single phase
    Air Pressure: 0.5MPa
    Dimension: 750mm*800mm*1700mm
    Weight: 400kg
  • Inquiry now

The JW-CM01 is an automatic twin-wire cutting, stripping and crimping machine that processes two wires at once — AWG16 to AWG28, cut lengths from 45 mm to 3,200 mm, with 1.5 T of crimping pressure. Running two wires per cycle is what makes it a production machine rather than a bench tool: output roughly doubles for the same floor space and the same operator.

Three fault conditions are detected automatically: no wire, no terminal, and insufficient crimping pressure. The machine stops rather than producing a run of bad leads, which is the failure mode that costs most in a harness shop — a whole batch discovered at inspection.

Cutting accuracy is specified as 0.2 % of cut length, so a 3,200 mm lead holds within about 6 mm. The 400 kg frame and 1.5 T press are built for that length: long leads pulled through a light machine drift and mis-feed.

Key Features

1. Two wires processed per cycle — roughly double the output of a single-wire machine.

2. AWG16 – AWG28 range, covering both power leads and small signal wire.

3. Cutting length 45 – 3,200 mm, with accuracy of 0.2 % of the set length.

4. 1.5 T crimping pressure on a 400 kg frame — stable on long, heavy leads.

5. Three automatic fault checks: no wire, no terminal, insufficient pressure.

6. Stripping length 0.5 – 14 mm, set in the program.

Technical Specifications

ParameterSpecification
ModelJW-CM01
FunctionAutomatic twin-wire cutting, stripping and crimping
Wire sizeAWG16 – AWG28
Cutting length45 – 3,200 mm (longer on request)
Cutting accuracy0.2 % of cutting length
Stripping length0.5 – 14 mm
Crimping pressure1.5 T
Fault detectionNo wire / no terminal / insufficient crimping pressure
Power supplyAC 220 V, 50 Hz, single phase
Air pressure0.5 MPa
Dimensions750 × 800 × 1,700 mm
Weight400 kg

Applications

— Double-lead assemblies — two wires crimped in one cycle for the same connector.

— Automotive and motorcycle harness — long leads at consistent 0.2 % accuracy.

— Appliance internal wiring — power and signal leads run together.

— High-volume contract work — fault detection keeps bad batches off the bench.

Automatic Twin Wire Crimp Machine
Automatic Twin Wire Crimp Machine

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each