Automatic Tube Cutting Coiling Binding Machine for Hoses Pipes WPM-CRT-02ML
Automatic Tube Cutting Coiling Binding Machine for Hoses Pipes WPM-CRT-02ML Thumb
Video Thumbnail

Automatic Tube Cutting Coiling Binding Machine for Hoses Pipes WPM-CRT-02ML

📅 2026-03-15 👁️ 1,892
  • Model No: WPM-CRT-02ML

  • Specifications

    Suitable Wire Diameter: ≤Φ8mm (hose/rope/two-part pipe)
    Tie Diameter: ≤40mm
    Production Speed: ≤900pcs/Hour
    Coil Inner Diameter: 90-200mm (fixed)
    Head Length: 80-200mm
    Tail Length: 80-200mm
    Incoming Wire Reel Weight: ≤7.5kg
    Applicable Air Pressure: 0.5-0.6MPa
    Power Supply: 220V/50Hz
    Machine Power: 3000W
    Dimensions: 1050*800*1600 mm
    Machine Weight: ≈260kg
  • Inquiry now

The WPM-CRT-02ML cuts hose, rope and two-part pipe up to Φ8 mm, coils the length and binds the coil with a cable tie. The coil forms to a fixed inner diameter in the 90-200 mm band, head and tail are each held at 80-200 mm, and the tie closes at 40 mm or less. Incoming reels of up to 7.5 kg sit on the side payoff, and output is rated at 900 pcs/h on 0.5-0.6 MPa air.

Cutting and coiling tube by hand gives an oval coil, a loose tail and a tape or strap applied at whatever point the operator reaches. This machine measures, cuts, coils and ties in one cycle, so the measuring jig, the hand coil and the separate strapping step are removed, and every coil leaves at the same ring size. Rated output is 900 pcs/h.

This is the tube and hose member of the group: no strip station, because the product is pipe rather than a terminated cable, and a fixed 90-200 mm coil instead of the adjustable 200-300 mm ring of the CPRT cable lines. The Φ8 mm ceiling and 900 pcs/h place it below the 1300 pcs/h coax model and above the 800 pcs/h 4 mm rope winder in throughput.

Key Features

1. Cut, coil and tie semi-rigid tube in one pass, with no strip station since the product is pipe rather than terminated cable.

2. Φ8 mm ceiling covering PVC, PE and silicone hose, plus rope and two-part pipe on the same setup.

3. Fixed 90-200 mm coil inner diameter, so ring size stays constant across a production lot.

4. Head and tail 80-200 mm each, with the tie at 40 mm or less for a compact coil.

5. 900 pcs/h with a 7.5 kg side-mounted payoff reel and 0.5-0.6 MPa air supply.

6. 3000 W, 1050 x 800 x 1600 mm, about 260 kg, on castors for cell relocation.

Technical Specifications

ParameterSpecification
Model NumberWPM-CRT-02ML
Suitable Wire Diameter≤Φ8 mm (hose, rope, two-part pipe)
Coil Inner Diameter90-200 mm, fixed
Head Length80-200 mm
Tail Length80-200 mm
Tie Diameter≤40 mm
Incoming Reel Weight≤7.5 kg
Production Speed≤900 pcs/h
Applicable Air Pressure0.5-0.6 MPa
Power Supply220 V / 50 Hz
Machine Power3000 W
Dimensions1050 x 800 x 1600 mm
Machine WeightAbout 260 kg

Applications

— PVC air and water hose: Φ6-8 mm hose cut to order, coiled at 90-200 mm inner diameter and tied for hardware packing.

— Silicone tubing: Φ3-8 mm tubing for pump and beverage lines, cut, coiled and tied before bagging.

— PE irrigation line: Φ4-8 mm black PE tube coiled and tied in uniform rings for agricultural distribution.

— Pneumatic twin tube: two-part pipe up to Φ8 mm cut and coil-tied as a matched pair for air-brake and actuator lines.

— Rope and cordage: braided rope up to Φ8 mm cut, coiled and tied for retail and industrial supply.

WPM-CRT-02ML touch-screen winding and binding machine with wire spool and figure-eight coil samplesWinding and binding machine labelled with 70-200mm ring diameter, tie bracket and control panelDetail panels of the binding machine: metal reel, tie mouth, PLC control and packing listWinding and tie wire size chart with coiled power, USB and network cable samplesCoiled and tied cables: USB, network, HDMI, power cords and earbuds cable
Tube Cut Coil Bind Machine WPM-CRT-02ML

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each